Product ID:EPK 0151 PART A
MSDS Date:02/18/1988
FSC:6080
NIIN:01-358-9686
Status Code:A
Kit Part:Y
MSDS Number: CJGNZ

Emergency Phone: 415-687-4201

Info Phone: 510-458-8000

Cage: 33564

Telephone: 770-798-3846

Cage: 1K705

EPOXY RESIN SYSTEM

SILICA

CAS: 7631-86-9

OSHA PEL 20 MPPCF

N-BUTYL GLYCIDYL ETHER

CAS: 2426-08-6

RTECS: TX4200000

OSHA PEL 270 MG/M3;50 PPM

ACGIH TLV: 133 MG/M3;25 PPM

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY
CAUSE SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS. BGE IS
MUTAGENIC IN VITRO. MUTAGENIC ITY TESTING IN MICE GAVE MIXED
RESULTS.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER
Effects of Overexposure:SKIN RASH, IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER

First Aid:FLUSH SKIN AND EYES WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITATION PE RSISTS, SEE PHYSICIAN.

Flash Point Method:TOC
Flash Point:=93.3C, 200.F
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINERS. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (70 DEG F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. KEY1=N1.

HCC:B2
Boiling Pt:=140.C, 284.F
Vapor Pres:<2.0
Vapor Density:3.8
Spec Gravity:1.15
Evaporation Rate & Reference:>1
Solubility in Water:<1%
Appearance and Odor:TRANSLUCENT, THIXOTROPIC LIQUID WITH SWEET, PLESANT
ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER
Hazardous Decomposition Products:CARBON MONOXIDE, NITROGEN OXIDES,
ALDEHYDES, ACIDS, AND UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES GREATER THAN 1 POUND TOTAL. DO NOT HEAT MIXED ADHESIVE
ABOVE 150 DEG F .

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.

Toxicological Information:NONE SPECIFIED BY MANUFACTURER

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:NONE SPECIFIED BY MANUFACTURER

Transport Information:NOT REGULATED PER MANUFACTURER'S MSDS.

SARA Title III Information:NONE SPECIFIED BY MANUFACTURER
Federal Regulatory Information:NONE SPECIFIED BY MANUFACTURER
State Regulatory Information:NONE SPECIFIED BY MANUFACTURER